End Mills

Bassett B52414 End mill Diameter: 5/16 Inch L: 1-1/2 Inch Shank Double End General Purpose Regular Length Square End

Bassett B52414 End mill Diameter: 5/16 Inch L: 1-1/2 Inch Shank Double End General Purpose Regular Length Square End.

FMT 0321479 End Mill Diameter: 7/8 Inch Length: 2-1/2 Inch

FMT 0321479 End Mill Diameter: 7/8 Inch Length: 2-1/2 Inch.

FMT 0321593 End Mill Diameter: 1/2 Inch Length: 3 Inch

FMT 0321593 End Mill Diameter: 1/2 Inch Length: 3 Inch.

FMT 0321683 Carbide End Mill Diameter: 11/16 Inch x 3/4 Inch L: 4 Inches

FMT 0321683 Carbide End Mill Diameter: 11/16 Inch x 3/4 Inch L: 4 Inches.

FMT 3154406 HSS End Mill Diameter: 9/64 Inches L: 2-1/4 Inches Double Ended

FMT 3154406 HSS End Mill Diameter: 9/64 Inches L: 2-1/4 Inches Double Ended.

FMT 3154556 End Mill Diameter: 3-1/2mm L: 2-3/8 Inch 3/8 Inch Shank HSS 30° Helix 4 Flute

FMT 3154556 End Mill Diameter: 3-1/2mm L: 2-3/8 Inch 3/8 Inch Shank HSS 30° Helix 4 Flute.

FMT 3154718 End Mill Diameter: 1-1/4 Inch Length: 8-1/2 Inch HSS 30° Helix 6 Flute Uncoated Finish Single End-Square Center Cut

FMT 3154718 End Mill Diameter: 1-1/4 Inch Length: 8-1/2 Inch HSS 30° Helix 6 Flute Uncoated Finish Single End-Square Center Cut.

FMT 3445660 End Mill Diameter: 3/8 Inches L: 2-1/2 Inches Carbide

FMT 3445660 End Mill Diameter: 3/8 Inches L: 2-1/2 Inches Carbide.

FMT Production 3154455 HSS End Mill Diameter5/8 Inch Length: 4-1/8 Inch

FMT Production 3154455 HSS End Mill Diameter5/8 Inch Length: 4-1/8 Inch.

Niagara Cutter 61735 Carbide Endmill S335 Diameter: 3/8 Inch Length: 2-1/2 Inches 3F SE 35 Degrees RH W/RAD UNC Round HD T-201 SS Preformed Clamps J-Series

Niagara Cutter 61735 Carbide Endmill S335 Diameter: 3/8 Inch Length: 2-1/2 Inches 3F SE 35 Degrees RH W/RAD UNC Round HD T-201 SS Preformed Clamps J-Series.

Niagara Cutter 61829 Carbide Endmill Diameter: 1 Inch 5 InchL S335 3F SE 35 Degree With RAD ALTIN 1 Inch x 1 Inch x 2-1/2 Inch

Niagara Cutter 61829 Carbide Endmill Diameter: 1 Inch 5 InchL S335 3F SE 35 Degree With RAD ALTIN 1 Inch x 1 Inch x 2-1/2 Inch.

OSG 20450511 Endmill Diameter: 3/8 X 5/8 Inch Carb Corner Radius

OSG 20450511 Endmill Diameter: 3/8 Inch L: 5/8 Inch Carb Corner Radius.